资源类型

期刊论文 40

年份

2023 3

2022 1

2021 4

2020 6

2018 3

2017 2

2016 1

2014 3

2012 5

2011 2

2010 1

2009 2

2008 1

2007 1

2003 1

2002 3

2000 1

展开 ︾

关键词

沙尘暴 2

膨胀土 2

风化砂 2

不毛之地 1

临震信号 1

人口、资源与环境 1

伊拉克 1

击实试验 1

初始干密度 1

含沙火源 1

固砂剂 1

土壤冲刷 1

基础灌砂 1

堆石混凝土坝 1

增加产量 1

太阳能同化效率 1

室内火灾 1

室内试验 1

对策建议 1

展开 ︾

检索范围：

排序： 展示方式：

Model testing of tripod caisson foundations in silty clay subjected to eccentric lateral loads

《结构与土木工程前沿（英文）》 2023年 第17卷 第3期   页码 467-476 doi: 10.1007/s11709-023-0933-6

摘要： In this study, model tests were conducted to investigate the bearing capacities of tripod caisson foundations subjected to eccentric lateral loads in silty clay. Lateral load–rotation curves of five eccentric-shaped tripod suction foundations were plotted to analyze the bearing capacities at different loading angles. It was observed that the loading angle significantly influenced the bearing capacity of the foundations, particularly for eccentric tripod caisson foundations. Compared with eccentric tripod caisson foundations, the traditional tripod foundation has a relatively high ultimate lateral capacity at the omnidirectional loading angle. By analyzing the displacement of the caissons, a formula for the rotational center of the tripod caisson foundation subjected to an eccentric lateral load was derived. The depth of the rotation center was 0.68–0.92 times the height of the caisson when the bearing capacity reached the limit. Under the undrained condition, suction was generated under the lid of the “up-lift” caisson, which helps resist lateral forces from the wind and waves.

关键词： tripod caisson foundation     silty clay     eccentric lateral capacity     model tests    

HTML PDF 收藏

A multi-attribute decision making approach of mix design based on experimental soil characterization

Amit K. BERA, Tanmoy MUKHOPADHYAY, Ponnada J. MOHAN, Tushar K. DEY

《结构与土木工程前沿（英文）》 2018年 第12卷 第3期   页码 361-371 doi: 10.1007/s11709-017-0425-7

摘要：

The clay mineral composition is one of the major factors that governs the physical properties of silty sand subgrade. Therefore, a thorough knowledge of mineral composition is essential to predict the optimum engineering properties of the soil, which is generally characterized by different indices like maximum dry density (MDD), California bearing ratio (CBR), unconfined compressive strength (UCS) and free swelling index (FSI). In this article, a novel multi-attribute decision making (MADM) based approach of mix design has been proposed for silty sand – artificial clay mix to improve the characteristic strength of a soil subgrade. Experimental investigation has been carried out in this study to illustrate the proposed approach of selecting appropriate proportion for the soil mix to optimize all the above mentioned engineering properties simultaneously. The results show that a mix proportion containing approximately 90% silty sand plus 10% bentonite soil is the optimal combination in context to the present study. The proposed methodology for optimal decision making to choose appropriate combination of bentonite and silty sand is general in nature and therefore, it can be extended to other problems of selecting mineral compositions.

关键词： silty sand     bentonite soil     soil mix design     multi-attribute decision making    

HTML PDF 收藏

Numerical simulation of compaction parameters for sand-filled embankment using large thickness sand filling

Wentao WANG, Chongzhi TU, Rong LUO

《结构与土木工程前沿（英文）》 2018年 第12卷 第4期   页码 568-576 doi: 10.1007/s11709-017-0444-4

摘要： The study uses the finite element method to simulate a new technique of highway sand embankment filling in Jianghan Plain district, which can raise the thickness of sand-filled layer from 30 cm to 70 cm and can significantly shorten the construction period based on the guarantee of sand embankment construction quality. After simulating the three compacting proposals carried out on the field test, the study uses COMSOL software to research on the compacting effects of sand-filled layers in larger thicknesses by 22 ton vibratory roller alone, and then to investigate the steady compacting effect of 12 ton vibratory roller. The simulation results indicate that the sand-filled layer thickness of 70 cm is suitable for the new sand filling technique, and the sand-filled embankment project with tight construction period is suggested to choose the 12 ton vibration roller for steady compaction.

关键词： sand embankment     compaction in large thickness     numerical simulation     small size vibratory roller     steady compaction    

HTML PDF 收藏

Unified description of sand behavior

Feng ZHANG, Bin YE, Guanlin YE

《结构与土木工程前沿（英文）》 2011年 第5卷 第2期   页码 121-150 doi: 10.1007/s11709-011-0104-z

摘要： In this paper, the mechanical behavior of sand, was systematically described and modeled with a elastoplastic model proposed by Zhang et al. [ ]. Without losing the generality of the sand, a specific sand called as Toyoura sand, a typical clean sand found in Japan, has been discussed in detail. In the model, the results of conventional triaxial tests of the sand under different loading and drainage conditions were simulated with a fixed set of material parameters. The model only employs eight parameters among which five parameters are the same as those used in Cam-clay model. Once the parameters are determined with the conventional drained triaxial compression tests and undrained triaxial cyclic loading tests, then they are fixed to uniquely describe the overall mechanical behaviors of the Toyoura sand, without changing the values of the eight parameters irrespective of what kind of the loadings or the drainage conditions may be. The capability of the model is discussed in a theoretical way.

关键词： constitutive model     sand     stress-induced anisotropy     density     structure    

HTML PDF 收藏

Shaking table test of composite foundation reinforcement of saturated silty soil for high speed railway

JIANG Guanlu, LIU Xianfeng, ZHANG Jianwen, ZHAO Ruyi

《结构与土木工程前沿（英文）》 2007年 第1卷 第3期   页码 353-360 doi: 10.1007/s11709-007-0047-6

摘要： Three shaking table model tests were conducted with a geometrical scale of 1:10 using a large-scale laminar shear box to investigate the reinforcement effects of compacted gravel column-net composite foundation and cement fly-ash gravel (CFG) column-net composite foundation on the saturated silty soil along the Beijing-Shanghai High Speed Railway. The research results indicate that the increase in excess pore water pressure can be restrained effectively by the compacted gravel column-net composite foundation to improve the anti-liquefaction ability of the ground, and that shear displacement of the ground can be reduced greatly by the compacted gravel column-net and CFG column-net composite foundations to improve the capability of resisting shear displacement of ground. Furthermore, the amplifying of response acceleration, induced by foundation liquefaction, and the settlement of foundation and subgrade can be reduced greatly by the compacted gravel column-net and CFG column-net composite foundations to improve the aseismatic property of the foundation and subgrade.

关键词： large-scale     CFG column-net     amplifying     displacement     subgrade    

HTML PDF 收藏

Research review of the cement sand and gravel (CSG) dam

Xin CAI, Yingli WU, Xingwen GUO, Yu MING

《结构与土木工程前沿（英文）》 2012年 第6卷 第1期   页码 19-24 doi: 10.1007/s11709-012-0145-y

摘要： The cement sand and gravel (CSG) dam is a new style of dam that owes the advantages both of the concrete faced rock-fill dam (CRFD) and roller compacted concrete (RCC) gravity dam, because of which it has attracted much attention of experts home and abroad. At present, some researches on physic-mechanical property of CSG material and work behavior of CSG dam have been done. This paper introduces the development and characteristics of CSG dam systematically, and summarizes the progress of the study on basic tests, constitutive relation of CSG material and numerical analysis of CSG dam, in addition, indicates research and application aspect of the dam.

关键词： cement sand and gravel (CSG) dam     cement sand and gravel (CSG) material     research review    

HTML PDF 收藏

Analysis of behavior of melted dark green silty soil

TANG Yiqun, ZHOU Nianqing, YANG Ping, SHEN Feng

《结构与土木工程前沿（英文）》 2008年 第2卷 第3期   页码 242-245 doi: 10.1007/s11709-008-0022-x

摘要： The behavior of dark green silty soil of the 6th storey is studied by means of scanning electron microscopy (SEM). The shape, size and contact condition of the basic elements of the soil microstructure, and the shape and the size of the pore are further studied. In addition, a comparative study is made to analyze the experiment results of Cu and dynamic test. The mechanic characteristics of common soil and those of melted soil are presented and their influences on dark silty soil after being frozen are theoretically illustrated from a microscopic perspective.

关键词： electron microscopy     mechanic     microscopic perspective     addition     dynamic    

HTML PDF 收藏

ORGANIC CARBON STOCKS IN A SILTY TEXTURED SOIL FOLLOWING REINTEGRATION OF A 20 YEARS OLD × SITE INTO

《农业科学与工程前沿（英文）》 2023年 第10卷 第2期   页码 183-197 doi: 10.15302/J-FASE-2023485

摘要：

● 0.98 Mg·ha−1·yr−1 Corg accumulation under miscanthus over 26 years.

关键词： biobased energy crops     C balance     humus accumulation    

HTML PDF 收藏

Effects of microfine aggregate in manufactured sand on bleeding and plastic shrinkage cracking of concrete

Branavan ARULMOLY; Chaminda KONTHESINGHA; Anura NANAYAKKARA

《结构与土木工程前沿（英文）》 2022年 第16卷 第11期   页码 1453-1473 doi: 10.1007/s11709-022-0877-2

摘要： Construction industries have started to utilize manufactured sand (MS) as an effective alternative for river sand in concrete. High-grade parent rocks are crushed to obtain MS, which also produces a considerable amount of microfine aggregate (MFA). The higher percentage of MFA could lead to both positive and negative effects on the performance of cement-based mixes. This research was done to examine the influence of varying MFA levels, specifically 0%, 3%, 6%, 9%, and 12% (by weight) as the partial replacements of MS on bleeding and plastic shrinkage cracking of concrete. In addition to the varying MFA levels, some concrete mixes also included fly ash (FA) and superplasticizer to investigate the effect of free-water content in the mixes. The bleeding test data were taken as on-site measurements, while the cracks from the plastic shrinkage cracking test were evaluated using an image processing technique. The results concluded that the MFA replacements and the effective water-to-cement ratio have a significant effect on the selected concrete properties. With the increasing replacement levels, cumulative bleeding and crack initiation life gradually decreased, while a progressive increase was observed for crack width, crack length, and crack area.

关键词： manufactured sand     fresh concrete     microfines     admixtures     shrinkage     cracking    

HTML PDF 收藏

Impacts of backwashing on micropollutant removal and associated microbial assembly processes in sand

《环境科学与工程前沿（英文）》 2023年 第17卷 第3期 doi: 10.1007/s11783-023-1634-z

摘要：

● Backwashing in sand filters with 2-h and 4-h EBCTs was simulated.

关键词： Sand filter     Backwashing     Recovery     Micropollutants     Community composition    

HTML PDF 收藏

Destructive and non-destructive evaluation of concrete for optimum sand to aggregate volume ratio

《结构与土木工程前沿（英文）》 2021年 第15卷 第6期   页码 1400-1414 doi: 10.1007/s11709-021-0779-8

摘要： Aggregates are the biggest contributor to concrete volume and are a crucial parameter in dictating its mechanical properties. As such, a detailed experimental investigation was carried out to evaluate the effect of sand-to-aggregate volume ratio (s/a) on the mechanical properties of concrete utilizing both destructive and non-destructive testing (employing UPV (ultrasonic pulse velocity) measurements). For investigation, standard cylindrical concrete samples were made with different s/a (0.36, 0.40, 0.44, 0.48, 0.52, and 0.56), cement content (340 and 450 kg/m3), water-to-cement ratio (0.45 and 0.50), and maximum aggregate size (12 and 19 mm). The effect of these design parameters on the 7, 14, and 28 d compressive strength, tensile strength, elastic modulus, and UPV of concrete were assessed. The careful analysis demonstrates that aggregate proportions and size need to be optimized for formulating mix designs; optimum ratios of s/a were found to be 0.40 and 0.44 for the maximum aggregate size of 12 and 19 mm, respectively, irrespective of the W/C (water-to-cement) and cement content.

关键词： aggregates     non-destructive testing     sand-to-aggregate volume ratio (s/a)     maximum aggregate size (MAS)    

HTML PDF 收藏

Effects of coarse and fine aggregates on long-term mechanical properties of sea sand recycled aggregate

《结构与土木工程前沿（英文）》 2021年 第15卷 第3期   页码 754-772 doi: 10.1007/s11709-021-0711-2

摘要： Typical effects of coarse and fine aggregates on the long-term properties of sea sand recycled aggregate concrete (SSRAC) are analyzed by a series of axial compression tests. Two different types of fine (coarse) aggregates are considered: sea sand and river sand (natural and recycled coarse aggregates). Variations in SSRAC properties at different ages are investigated. A novel test system is developed via axial compression experiments and the digital image correlation method to obtain the deformation field and crack development of concrete. Supportive results show that the compressive strength of SSRAC increase with decreasing recycled coarse aggregate replacement percentage and increasing sea sand chloride ion content. The elastic modulus of SSRAC increases with age. However, the Poisson’s ratio reduces after 2 years. Typical axial stress–strain curves of SSRAC vary with age. Generally, the effect of coarse aggregates on the axial deformation of SSRAC is clear; however, the deformation differences between coarse aggregate and cement mortar reduce by adopting sea sand. The aggregate type changes the crack characteristics and propagation of SSRAC. Finally, an analytical expression is suggested to construct the long-term stress–strain curve of SSRAC.

关键词： sea sand recycled aggregate concrete     recycled coarse aggregate replacement percentage     sea sand chloride ion content     long-term mechanical properties     stress–strain curve    

HTML PDF 收藏

Performance of fiber reinforced clayey sand composite

Amin CHEGENIZADEH, Hamid NIKRAZ

《结构与土木工程前沿（英文）》 2012年 第6卷 第2期   页码 147-152 doi: 10.1007/s11709-012-0158-6

摘要： Soils and their related behavior have always been the subject of many studies. Recent researches show some interests in investigation of inclusion of randomly distributed fiber in soil. This study focuses on effect of fiber inclusion on the strength and other parameters of clayey sand composite material. First part of this study is related to effective parameters on strength of the clayey sand composite with using natural fiber and plastic fiber and different fiber contents and length. Triaxial consolidated undrained (CU) tests were carried out to investigate behavior of the composite under different condition. The fiber percentage varied from 0% (for unreinforced samples) to 4% and fiber length varied from 8 to 25 mm. The fiber length and fiber content found to play important rule on the strength of fiber reinforced composite.

关键词： triaxial     consolidated undrained (CU)     fiber     strength    

HTML PDF 收藏

The coupling of sand with ZVI/oxidants achieved proportional and highly efficient removal of arsenic

Sana Ullah, Xuejun Guo, Xiaoyan Luo, Xiangyuan Zhang, Yameng Li, Ziyu Liang

《环境科学与工程前沿（英文）》 2020年 第14卷 第6期 doi: 10.1007/s11783-020-1273-6

摘要： Abstract • Simply doping sands with ZVI achieved an even activation of ZVI by oxidants. • Sand doping facilitated proportional As trapping along the ZVI/oxidants column. • ZVI/sand/oxidants are highly efficient for arsenic removal. • ZVI/sand/oxidants reduced significantly the Fe2+ leaching and effluent turbidity. • More than 54% of arsenic was reduced to As(III) in ZVI/sand/oxidants system. The coupling of zero-valent iron (ZVI) with common oxidants has recently achieved very rapid and highly efficient removal of Heavy metals from wastewater. However, the uniform activation of ZVI throughout the column and the proportional removal of target contaminants are urgently required for the prevention of premature filter clogging and the extension of the effective column operational time. In this study, we successfully achieved this objective by simply doping granular sand with ZVI at appropriate weight ratios. When pure ZVI packed column was spiked with oxidants, the majority of As trapping occurred between the column inlet and the first sampling point. In a packed column with a 1:20 mixture of ZVI and sand, the average As removal efficiency was 36 (1st), 13.1 (2nd), 18.5 (3rd), 19.2 (4th) and 5.9% (5th outlet). The overall arsenic removal performance of the composite filling system of ZVI/sand was equally as efficient as that of the previous pure ZVI-packed system. Moreover, the leaching of Fe was significantly reduced with an increased sand ratio, resulting in clearer water with less turbidity. The results of X-ray photoelectron spectroscopy (XPS) demonstrated that more than 54% of the arsenic was reduced to As(III). X-ray diffraction (XRD) and scanning electron microscopy (SEM) confirmed the extensive corrosion of the ZVI surface, which resulted in various species of iron oxyhydroxides responsible for the highly efficient sequester of arsenic through reduction, adsorption, and coprecipitation.

关键词： Arsenic     ZVI     Sand     Oxidants     Fixed-bed Column     Removal    

HTML PDF 收藏

Effect of microlimestone on properties of self-consolidating concrete with manufactured sand and mineral

Fulin Qu, Wengui Li, Xiaohui Zeng, Zhiyu Luo, Kejin Wang, Daichao Sheng

《结构与土木工程前沿（英文）》 2020年 第14卷 第6期   页码 1545-1560 doi: 10.1007/s11709-020-0678-4

摘要： Self-consolidating concrete (SCC) with manufactured sand (MSCC) is crucial to guarantee the quality of concrete construction technology and the associated property. The properties of MSCC with different microlimestone powder (MLS) replacements of retreated manufactured sand (TMsand) are investigated in this study. The result indicates that high-performance SCC, made using TMsand (TMSCC), achieved high workability, good mechanical properties, and durability by optimizing MLS content and adding fly ash and silica fume. In particular, the TMSCC with 12% MLS content exhibits the best workability, and the TMSCC with 4% MLS content has the highest strength in the late age, which is even better than that of SCC made with the river sand (Rsand). Though MLS content slightly affects the hydration reaction of cement and mainly plays a role in the nucleation process in concrete structures compared to silica fume and fly ash, increasing MLS content can evidently have a significant impact on the early age hydration progress. TMsand with MLS content ranging from 8% to 12% may be a suitable alternative for the Rsand used in the SCC as fine aggregate. The obtained results can be used to promote the application of SCC made with manufactured sand and mineral admixtures for concrete-based infrastructure.

关键词： microlimestone powder     manufactured sand     retreated manufactured sand     self-consolidating concrete     mineral admixture    

HTML PDF 收藏

标题 作者 时间 类型 操作

Model testing of tripod caisson foundations in silty clay subjected to eccentric lateral loads

期刊论文

A multi-attribute decision making approach of mix design based on experimental soil characterization

Amit K. BERA, Tanmoy MUKHOPADHYAY, Ponnada J. MOHAN, Tushar K. DEY

期刊论文

Numerical simulation of compaction parameters for sand-filled embankment using large thickness sand filling

Wentao WANG, Chongzhi TU, Rong LUO

期刊论文

Unified description of sand behavior

Feng ZHANG, Bin YE, Guanlin YE

期刊论文

Shaking table test of composite foundation reinforcement of saturated silty soil for high speed railway

JIANG Guanlu, LIU Xianfeng, ZHANG Jianwen, ZHAO Ruyi

期刊论文

Research review of the cement sand and gravel (CSG) dam

Xin CAI, Yingli WU, Xingwen GUO, Yu MING

期刊论文

Analysis of behavior of melted dark green silty soil

TANG Yiqun, ZHOU Nianqing, YANG Ping, SHEN Feng

期刊论文

ORGANIC CARBON STOCKS IN A SILTY TEXTURED SOIL FOLLOWING REINTEGRATION OF A 20 YEARS OLD × SITE INTO

期刊论文

Effects of microfine aggregate in manufactured sand on bleeding and plastic shrinkage cracking of concrete

Branavan ARULMOLY; Chaminda KONTHESINGHA; Anura NANAYAKKARA

期刊论文

Impacts of backwashing on micropollutant removal and associated microbial assembly processes in sand

期刊论文

Destructive and non-destructive evaluation of concrete for optimum sand to aggregate volume ratio

期刊论文

Effects of coarse and fine aggregates on long-term mechanical properties of sea sand recycled aggregate

期刊论文

Performance of fiber reinforced clayey sand composite

Amin CHEGENIZADEH, Hamid NIKRAZ

期刊论文

The coupling of sand with ZVI/oxidants achieved proportional and highly efficient removal of arsenic

Sana Ullah, Xuejun Guo, Xiaoyan Luo, Xiangyuan Zhang, Yameng Li, Ziyu Liang

期刊论文

Effect of microlimestone on properties of self-consolidating concrete with manufactured sand and mineral

Fulin Qu, Wengui Li, Xiaohui Zeng, Zhiyu Luo, Kejin Wang, Daichao Sheng

期刊论文